Study on Multi-Dimensional Paths of Green Manufacturing and Sustainable Development in Indonesia's Automotive Industry

Peng Chengkang

doi:10.47134/jees.v2i4.837

Authors

Peng Chengkang President University

DOI:

https://doi.org/10.47134/jees.v2i4.837

Keywords:

Green Manufacturing, Sustainable Development

Abstract

With its long industrial chain and high correlation, the automobile industry has a significant driving effect on the upstream and downstream economies. Promoting the construction of a green automobile manufacturing and management technology system is an important path for Indonesia to achieve coordinated development of economic growth and ecological protection. Based on the perspective of the entire life cycle of automobiles, this paper constructs a multidimensional model of the green manufacturing technology system from five dimensions: environmental carrying capacity, resource recycling, low-carbon energy substitution, economic cost optimization, and timeliness balance. Through a systematic analysis of the key technology systems required for the development of green automobiles, such as clean energy drive, lightweight design, and recycling remanufacturing, a localized implementation strategy is proposed. The study aims to provide a theoretical framework for Indonesia to reduce the carbon footprint of the automobile industry and enhance resource utilization efficiency, so as to help it enhance the international competitiveness of the manufacturing industry through green transformation, while alleviating the ecological and environmental pressures in the process of industrialization

References

Abbas, A., & Yan, C. (2021). A review on green manufacturing: Recent advancements and future prospects. Journal of Cleaner Production, 283, 124591. DOI: https://doi.org/10.1016/j.jclepro.2020.124591

Al-Alimi, S., Yusuf, NK, Ghaleb, AM, Lajis, MA, Shamsudin, S., Zhou, W., ... & Adam, A. (2024). Recycling aluminum for sustainable development: A review of different processing technologies in green manufacturing. Results in Engineering, 102566. DOI: https://doi.org/10.1016/j.rineng.2024.102566

Al-Hakimi, M. A., Al-Swidi, A. K., Gelaidan, H. M., & Mohammed, A. (2022). The influence of green manufacturing practices on the corporate sustainable performance of SMEs under the effect of green organizational culture: A moderated mediation analysis. Journal of Cleaner Production, 376, 134346. DOI: https://doi.org/10.1016/j.jclepro.2022.134346

Awasthi, A., & Govindan, K. (2021). A multi-tier sustainable supply chain framework in the automotive industry. Resources, Conservation and Recycling, 172, 105650.

Bocken, N. M. P., Strupeit, L., Whalen, K., & Nußholz, J. L. (2021). A review and evaluation of circular business model tools. Sustainability, 13(23), 13556.

Cai, Y., Chen, D., & Wang, Z. (2020). Impact of green product design and innovation on firm performance: Evidence from Chinese manufacturing firms. Sustainability, 12(14), 5781.

Cao, D., & Chen, L. (2023). Eco-efficiency analysis of automotive production using a hybrid DEA-LCA method. Journal of Industrial Ecology, 27(1), 99–111.

Choudhury, B. K., & Srivastava, A. (2022). Smart sustainable manufacturing: An integrated approach. Procedia CIRP, 106, 248–253.

Dewi, M. N. R., & Nugroho, A. (2021). Inovasi hijau dalam industri otomotif Indonesia: Tantangan dan peluang. Jurnal Teknologi dan Lingkungan, 22(3), 201–210.

Dong, J., Huang, Y., & Liu, W. (2021). Greening the automotive industry: Technological innovation and green transformation. Journal of Cleaner Production, 278, 123839.

European Environment Agency. (2022). The Circular Economy and the Automotive Sector. https://www.eea.europa.eu

Faizal, A., & Sari, R. (2023). Life cycle analysis of electric vehicle production in Indonesia. Jurnal Energi dan Lingkungan, 19(1), 33–42.

Gao, X., Zhang, Z., & Tang, Y. (2020). Lifecycle cost modeling for automotive remanufacturing strategies. Sustainable Production and Consumption, 21, 123–132.

Geng, Y., Fu, J., & Sarkis, J. (2019). Industrial symbiosis and green manufacturing: Comparative case studies. Journal of Industrial Ecology, 23(3), 545–558.

Govindan, K., & Hasanagic, M. (2021). A systematic review on drivers, barriers, and practices toward circular economy: A supply chain perspective. International Journal of Production Research, 59(11), 3436–3460.

Haryanto, B., & Putri, D. N. (2020). Kebijakan pengurangan emisi di sektor otomotif: Tinjauan terhadap pengembangan kendaraan listrik nasional. Jurnal Ekonomi Hijau, 5(2), 45–55.

IEA. (2023). Green Manufacturing and Low-Carbon Transition: Global Status Report. International Energy Agency.

Jamaludin, Z., & Abdullah, N. A. (2022). Carbon reduction strategies in the automotive sector: Evidence from Southeast Asia. Environmental Science and Pollution Research, 29, 15264–15278.

Karakaya, E., & Sriwannawit, P. (2021). Analysis of the barriers to the adoption of cleaner production technologies. Journal of Cleaner Production, 293, 126220.

Kumar, A., & Dixit, G. (2021). Framework for green product design in automotive: A literature review. Sustainable Production and Consumption, 28, 296–308.

Kurniawan, T., & Handayani, L. (2023). Evaluasi sistem daur ulang kendaraan bekas di Indonesia. Jurnal Pengelolaan Sumber Daya Alam dan Lingkungan, 13(2), 156–167.

Li, Y., Cobbinah, J., Abban, O. J., & Veglianti, E. (2023). Does green manufacturing technology innovation decrease energy intensity for sustainable development?. Economic Analysis and Policy, 78, 1010-1025. DOI: https://doi.org/10.1016/j.eap.2023.05.001

Luthra, S., & Mangla, S. K. (2020). Enablers of circular economy in the automotive sector: A study from emerging markets. Technological Forecasting and Social Change, 160, 120233. DOI: https://doi.org/10.1016/j.techfore.2020.120233

Moussavi, S., Thompson, M., Li, S., & Dvorak, B. (2021). Assessment of small mechanical wastewater treatment plants: Relative life cycle environmental impacts of construction and operations. Journal of Environmental Management, 292, 112802. DOI: https://doi.org/10.1016/j.jenvman.2021.112802

Peiró, L. T., Martin, N., Méndez, G. V., & Madrid-López, C. (2022). Integration of raw materials indicators of energy technologies into energy system models. Applied Energy, 307, 118150. DOI: https://doi.org/10.1016/j.apenergy.2021.118150

Velenturf, A. P., & Purnell, P. (2021). Principles for a sustainable circular economy. Sustainable production and consumption, 27, 1437-1457. DOI: https://doi.org/10.1016/j.spc.2021.02.018